How to change Fitbit band straps easily

Explains how to change Fitbit band styles, with steps to change the bands on Ace, Alta, Blaze, Charge, Vera, Sense and Ionic Fitbit models.

Find more technology guides, tips and advice

Fitbit offers the possibility to change the wristbands with its newer fitness trackers and smartwatches. A very nice feature that makes Fitbit even more interesting. This article provides a list of all Fitbit devices on which the wristband can be changed and steps for how to change Fitbit band straps.

Which Fitbit bands can be changed?

In the following table you will find all fitness trackers and smart watches from Fitbit with the information whether the wristband can be changed.  See Superwatches for a comparison of the Fitbit models.

Fitbit wristband compatibility

Fitbit unfortunately has little compatibility among its devices in terms of the wristbands. The same also applies to the charging stations. Fitbit also has its own system for each fitness tracker there. Personally, I think that’s a shame.

Do the bracelets from the Fitbit Charge 2 fit the Charge 3?

The Fitbit Charge 3 is the successor to the Charge 2 and looks very similar. Still, there are several differences between the Fitbit Charge 2 and Charge 3 . Among other things, the bracelets. Thus, the wristbands from Charge 2 do not fit on Charge 3 . The same also applies the other way round, of course.

Do the Fitbit Alta wristbands fit on the Alta HR?

There is positive news here. The Fitbit Alta and Alta HR wristbands are identical . The fitness trackers in themselves, however, are not. Your heart rate is the biggest difference between the Fitbit Alta and Alta HR . The same bracelets also fit on the Fitbit Ace* , the fitness tracker for children. So here we have a grouping – Fitbit Alta, Alta HR, Ace.

Do the Flex bracelets fit on the Flex 2?

In contrast to its successor, the Flex 2, the bracelet cannot be changed on the Fitbit Flex . This basically makes the question superfluous. In some cases you will find what you are looking for. However, if you look closely, it quickly becomes clear that these are bracelets for the Fitbit Flex 2.

How to change Fitbit band straps

As you saw in our list above. the bracelet can be changed on many Fitbit models. The bracelets vary in size, color and shape and are available in the shop on the provider’s website. The various closures are relatively similar and not too difficult to change, but there are some for which the wristband is changed a little differently, so we have given instructions for 3 below: the Charge 2, Charge 3 and the Versa models.

As a rule, there are small hooks directly on the model of the fitness tracker. These are pressed together and the bracelet comes off. This usually has to be done separately for each side. Depending on the device, the hooks look a little different. 

How to change Fitbit Ace and Alta bands

1. Turn your tracker over and look for the clasps – there is a clasp at the point where the bracelet meets the frame.
2. Press the flat metal button on the strap to open the clasp.
3. Slide the tape up so it is removed from the tracker.
4. Repeat this process on the other side. If you have problems or if it gets stuck, gently rock the tape back and forth so it loosens.
5. To attach the tape, simply slide the tape at the end of the tracker onto the top of the tracker until it clicks into place.

How to change Fitbit Blaze band straps

1. Place Blaze upside down on a flat, smooth surface.
2. On each side, find the clasp (top or bottom) where the bracelet meets the frame.
3. Use your finger or nail to slide the clasp to the other side, applying gentle pressure to unlock it. Pull the tape away from the frame.
4. Take the tape that you want to attach. Make sure you choose the correct band (top or bottom). The top strap has a pin buckle at the end. The lower band has holes.
5. To attach the tape, find the pin opposite the notch and slide it into the hole in the frame.
6. While sliding the strap into place, pull the latch out and release to secure the strap to the frame.
7. Repeat this process on the other side.

How to change Fitbit Inspire band straps

1. Turn Inspire over and find the quick release lever.
2. While pressing the clasp inward, gently the band off the tracker to release it.
3. Repeat this process on the other side.
4. Slide the pin (on the side opposite the clasp) into the hole in the tracker. Use the clasp to attach the new band to the top of the tracker.
5. While pushing the quick release inward, slide the other end of the bracelet into the correct position.
6. When both ends of the pin are inserted, release the quick release lever.

How to change Fitbit Charge 2 band

1. Put the Charge 2 down and turn the tracker over.
2. On both sides of the track you will find a locking mechanism where the wristband meets the tracker.
3. Press the metal button inside a clasp to open the mechanism.
4. Then slide the strap up to release it from the clasp.
5. Now repeat this with the other locking mechanism.
6. If one of the straps cannot be pushed up so easily and jams, gently jerk it back and forth until it can be lifted out.
7. Now insert the replacement strap from above into the opened clasps until you feel it click into place.

How to change Fitbit Charge 3 band

If you have bought a new bracelet for the Fitbit Charge 3 , then you are now faced with the task of changing it. To do this, first remove the existing bracelet and then insert both parts of the new bracelet. It works as follows step by step:

1. Take the Charge 3 off your wrist and look at the bottom of the tracker.
2. The two parts of the bracelet go up and down. By pressing the small button, you open the mechanism and you can carefully pull the bracelet off the tracker.
3. Then repeat this on the other side.
4. Now take the bracelet that you want to exchange.
5. Gently slide the wristband onto the tracker until it clicks into place.
6. Finally, repeat this for the other part of the bracelet as well.

How to change Fitbit Versa, Vera Lite and Versa 2 band

1. Make sure that you fasten the band with the clasp on the upper part of the watch. Otherwise you will not be able to close the Fitbit Versa on the wrist as usual and intended.
2. Slide the pin of your new bracelet into the matching notch on the watch case. This pin is on the side opposite the clasp. 
3. Then you push the clasp inwards and push the other end of the strap into the correct position. 
4. Once you have inserted both ends of the pin, let go of the clasp. If you’ve done everything correctly, your new bracelet should now be attached.

How to change Fitbit Versa 3 and Sense band

1. Turn your watch over and find the bracelet clasps.
2. Push the flat button towards the strap to release the latch.
   Gently pull the bracelet away from the watch to remove it.
3. Repeat this process on the other side.
4. To attach a bracelet, push it into the case of the watch until you feel it click into place. The band with the loops and the pin is attached to the top of the watch.

How to change Fitbit Ionic band straps

1. Turn your Ionic over and look for the closures of the straps – there is a clasp at the point where the bracelet meets the frame.
2. Press the flat metal button on the strap to open the clasp.
   Gently pull the bracelet away from the watch to remove it.
   Repeat this process on the other side. If you have trouble removing the strap or if it gets stuck, gently rock the strap back and forth to loosen it.
3. To attach a bracelet, push it into the case of the watch until you feel it click into place. The strap with the clasp is attached to the top of the watch.