If you are one of the many people who do not have a bathtub in the house. Then your shower will probably be in use almost daily. However, in order for it to look beautiful for a long time and not calcify so quickly, it must be cleaned regularly. Our guide outlines how to clean a shower cubicle easily and prevent it getting too dirty in the future.
Find more cleaning tips and guides in our Cleaning section.
Tips to clean a shower cubicle easily
Who doesn’t know. You rush into the shower before work or in the evening and have little time to clean it afterwards. So it’s quickly put on again and we start the day. However, you can’t see that after each shower, dirt and lime accumulate bit by bit in the shower tray and at the shower separation. Even if you clean the bathroom completely later, you already have a problem. While residues of the shower bath and shampoo can still be removed relatively easily, the lime on the shower wall and shower door has already spread and left ugly stains there. You only get them down with hard work. For this reason, it is recommended to remove the water after each shower with a rubber squeegee and to pat the shower wall dry. Thus, the annoying lime cannot form in the first place and in the future you will be able to clean a shower cubicle easily
If the water is too hard
In regions where the water is very hard and therefore chalky it becomes difficult to clean a shower cubicle easily. In these areas, in the shower and at the amatures, calcareous deposits are much stronger and form faster. Is that your case? Then you can rely on successful lime removers to clean a shower cubicle easily. If this does not help, a shower filter can be a solution. It is installed in the shower and filters the lime out of the water before it flows through your shower shower. Not only your bathroom and your complete shower, but also skin and hair are happy. Because they too are reefed and strained by the many lime.
5 tips and tricks to clean a shower cubicle easily
To prevent your shower from becoming polluted and calcified so quickly, you should clean the inner surfaces at regular intervals. If you use a shower curtain, even larger amounts of water can get onto the bathroom tiles. If this is the case, you must also scrub them thoroughly, otherwise molds and lime residues will form outside the shower. The installation of a shower separation reduces these unwanted sharpeners and the risk of slipping after showering. However, the walls of a shower cubicle must also be cleared of unsightly lime stains.
Below we have collected 5 tips on how to keep your shower clean and save you unnecessary effort:TipIf the calcification is high, you can leave the solution on for 20-30 minutes. After that, the lime should have dissolved.
Tip 1: Rely on vinegar and citric acid
In the shower, lime is deposited particularly quickly and becomes visible on the shower tray and shower separation. The amatures and the shower bar are also often affected. You can easily add these limestone stalks to the collar with home remedies such as vinegar or citric acid. To do this, mix a few drops of one of the two products with water and spread this solution with a sponge or soft cloth on the calcified area.
Tip 2: Specialist cleaning products
If you do not want to rely on home remedies, you can of course also rely on commercially available products for the cleaning shower cubicle. You can find them in the supermarket or in the drugstore. However, these are usually aggressive chemicals that are not environmentally friendly.
Tip 3: Use alcohol against mould
Especially in rental apartments, it often happens that the shower cubicle is now so old that mold has settled on the shower compartment or in the silicone joints. You can do this with the help of alcohol. Simply buy 70 percent alcohol in the pharmacy or supermarket and apply it to the affected areas with a sponge. After half an hour of insertion, you can wipe again and should have removed the mould with it.
If the mould has already spread very widely, however, do not avoid having the silicone joint replaced.
Tip 4: The steam cleaner
If you like it especially clean and germ-free, you can use a steam cleaner and clean your shower cubicle. It pays off especiallyif your shower separation includes glass. But also the shower tray and even the shower bathtub can be cleaned effectively and easily. The hot steam that comes out of the device removes dirt and bacteria without much effort. The advantage of this is that amatures and glass do not scratch during cleaning.
Tip 5: Rely on the Lotus Effect
You’ve probably heard about the lotus effect before. It is mainly used for windscreens of cars and ensures that the water hitting the disc simply rubs off. You can also benefit from this effect in your shower if your shower cubicle is made of glass. Clean the shower separation beforehand with a conventional glass cleaner and then rub the disc with a soft cloth and auto polish. After a short time of use, you can use your shower again.
Conclusion
As you can see, there are different ways to clean a shower cubicle easily. For example, you can rely on home remediesto remove dirt and lime from shower tray and shower separation. You can also use commercially available shower cabin cleaners or a steam cleaner. In order to save a large part of the work, however, after each shower course, remove the water once with a rubber pull and then pat the shower wall dry. Thus, the lime cannot be deposited on the tiles or the amatures.
