When temperatures fall, heating costs rise. Our guide shows how to make the most of the heating and how to cut your heating bill with 10 easy tips.
Anything fun is too expensive and unhealthy? This also applies a bit to heating in winter. Of course, the idea of running the heating all day is somehow appealing. But in the long run, this only leads to a high heating bill and weakens the immune system.
Cut your heating bill and have better health
So instead of heating a lot, it is better to be heating wisely. This includes technical innovations, proven measures and a thorough inventory.
We have collected 10 tips to help you save on heating costs and live in good health even in winter.
- Observe the acclimatization time:20 degrees is the recommended, healthy room temperature. Setting the heating higher is more comfortable in the short term, but our body gets used to the warmer temperatures. Conversely, you can also get used to a room temperature of 20 degrees. In this way, we freeze less in the long term and save heating costs.
- Setting the thermostat correctly: The numbers on the controller represent concrete temperatures. The middle stage corresponds to a room temperature of 20 degrees Celsius for many devices.
- Wrap up warm: Of course, you should not have to sit on the sofa in a winter coat. Too cold temperatures harm health and the building material. But before you move the heater from the middle to the highest level, don’t wear a warmer sweater, knitted vest or warm socks. Your houseplants can also enjoy a room temperature of 20 to 22 degrees!
- Intelligent heating:Many manufacturers, such as Eberle, Bosch or Vaillant, offer the possibility to make their own heating system “smart” without much effort. Controllable radiator thermostats, temperature sensors and apps help you avoid heating unnecessarily and can also be set to have a pleasantly tempered apartment waiting for you when you get home from work.
- Make tight :Check before the cold season whether the windows are tight and the insulation is intact. Especially in the old building, there are often thermal bridges on windows and cracks in the wall. These not only drive up heating costs, but can also cause housing mold.
- Properly ventilating: Instead of letting the windows tilt throughout the day, make regular shock ventilation a habit. Open all windows three to four times a day for a quarter of an hour, ventilate thoroughly and then close again.
- Use blinds: Dropped blinds not only prevent strangers from getting the best insight into your living room on dark nights. They also act as additional insulation and prevent the room from losing heat through the window panes. There are also smart solutions for the blind control, with which, for example, the control of the heating can be coordinated with the control of the blinds. Even thick curtains in front of the windows fulfil this function; however, make sure that the radiators are not obscured.
- Keeping radiators free: In order for the entire heating effect to unfold, it is necessary that the radiator is not covered by furniture, curtains, fabrics or the like. In addition, it is recommended to thoroughly vent and clean the device before the start of the heating period. Dust deposits not only reduce the heating effect, but also strain the airways.
- Door to: The best heating concept is of no use if the doors are open and the heat moves into colder areas. Therefore, be sure to keep the doors of the heated rooms closed. Draught stoppers in front of the door gap also keep the heat in the room.
- Heating Check: Various websites offer a heating check. Here you can calculate the heating costs and energy consumption of buildings and take appropriate measures.
However, the rooms should not become too cold, otherwise mold infestation threatens. You can read here how to prevent mold.